TECHNICAL DATA

Property		 Typical Value Test Method
1. Solids content, % 64 (+/-1) ASTM-D-1076
2. Viscosity, CPS 50,000-70,000 Brookfield
3. Density, kg/l 1.30 (+/0.05) ASTM-D-1475-16
4. Application Temp, °C +5 (Minimum) In-House Test
5. Curing Time, at 25°C Approx. 8 hr. for touch dry In-House Test
6. Service Temperature °C Approx. –5 to 100 In-House Test
7. Tensile Strength, N/CM² 480 ASTM-D-412
8. Elongation, at Break % 440 ASTM-D-412
9. Hardness, Shore A 68 ASTM-D-2240
10. Permeability Pass ASTM-E-398
11. Dry Peel Adhesion, lbs/sq.in. 65 ASTM-C-297
12. Flexibility No cracking of film when aged over 10 years weathering conditions and flexed 180 degrees In-House Test
13. UV Resistance 2000 hrs. NO deterioration, no color fade ASTM-D-822
14. Colors Satin While & Grey, other colours by request  
15. Coverage For 1 mm thick dry film allow approx. 1.10 kg/m²  

* Incorporation of reinforcement increases certain dry film properties.

The information given in this Technical Data Sheet reflects typical median properties based on laboratory test, and practical experience; subject to the tolerance levels of UEAtc directives. However, as the product is often used under conditions beyond our control, we can’t warrant but the product itself.

This publication automatically supersedes all previous
Publications relating to this product

ACR01

MAY08

R-00

00